Your current location: Home / Application / Mechanical Applications
The in-situ tensile heating/cooling stage is a device used to test the stress-strain characteristics of samples in a variable temperature environment. It can perform tensile, compressive, or programmed cyclic loading on samples.
GoGo Instruments customized a 500N, RT-150°C tensile heating stage for the Ningbo Institute of Materials Technology and Engineering, to be compatible with the FluxOS R1 Angle-Resolved Spectrometer. This setup is used to measure the optical incidence at various angles onto the surface of an elastic polymer hydrogel under both heating and tensile conditions.
FluxOS R1 Angle-Resolved Spectrometer
GoGo Instruments In-situ Tensile Heating/Cooling Stage
Main Technical Parameters:
Temperature Range: RT ~ 150°C
Temperature Stability: ±0.1°C
Temperature Ramp Rate: Adjustable, 0.1~20°C/min
Tensile Force Capacity: 500N
Force Accuracy: 0.5% F.S.
Displacement Distance: 50mm
Tensile Speed: 0.1~40 mm/min
Displacement Accuracy: ±10μm
Application Site of GoGo Instruments In-situ Tensile Heating/Cooling Stage
Safeguarding Research!
Tel: 18014878671 (Same as WeChat)
Web: www.gogoyq.com
E-mail: wjw@gogoyq.com
Address: No. 308, Baichuanghui, Binhe Road, Suzhou, China
